How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct set of steps to take to add the second key. It requires dealer service using a handheld computer called Tech-2. A new key and transponder must be purchased and then programmed to the car.
It is a good idea to rotate your keys so that one doesn't get worn out more quickly than the other. This will help keep your keys in top condition.
Replacement Case
The new key fobs are not like the old Saab keys. They feature electronic components that make it difficult to duplicate. That has made car theft significantly more difficult than it was twenty years ago. But, it has also made replacing lost keys a comparatively costly endeavor.
Saab 9-3 owners must have two keys working. If one is lost it is expensive to add another to the car since it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers charge between $100-$200 to do this.
There are ways to avoid these high costs. Some parts suppliers can look up the code from a spare key (usually the same one that opens the doors and turns off the ignition) and cut a brand new metal key blade for a fraction of the dealer's cost. saab 9-3 key not accepted contact service www.thekeylab.co.uk must be the exact same as the original to allow it to work in your vehicle.
You can also replace the case yourself by following these steps. You will need a flathead screwdriver along with some patience. With the screwdriver, break away the plastic and take out the emergency key. Once you have the case opened, take out the electronics and place them inside your new case. Make sure you insert the correct key and badge inside the case.
Replacement Battery
The Saab 9-3 replacement battery is a cheap component that can be easily and quickly replaced. This video tutorial on DIY from YouTube Cyclone Cyd, a user on YouTube, explains how to replace the battery for the remote key fob in just four steps. This tutorial will work with any modern Saab key fob. However, the procedure might differ slightly.
The first step is to locate the button that will release the backup key on the fob. It's usually next to the Saab logo on the back of the fob. Next you will need a flathead screwdriver to insert into the small hole inside this button. This should be enough to open the fob's case to allow you to replace the battery.
After the new battery CR1632 is installed You can then reassemble the remote key fob, and then program it to your car. The entire process should not exceed an hour. It is a very simple process that does not require any special tools.
If you lose a key the procedure will be slightly more complicated, but it can still be accomplished. The dealer must first read the VIN of the vehicle and order a replacement TWICE module and key blade that has the correct unique code. Then, they'll be required to cut the replacement key and then program it with a brand new tool for programming called MDI.
Replacement Key Fob
The key fob is the piece that locks and unlocks your car. It has batteries inside. The batteries last for a certain time and will eventually fail. This is a regular issue that happens with all cars, and the good news is that you can change the batteries in many fobs, without replacing the whole case. Amazon sells replacement fobs that already have all the electronic components installed. You can simply open the case and replace the batteries. It is necessary to remove the emergency key before you can replace the batteries. To do this, place a small flathead screwsdriver into the slot in the middle. Work the screwdriver around the case until it will split open, making it easy to take it out.
If you're ready to replace your keys, make sure you have a spare available. This will save you a lot of money. If you have an extra key, you can ask the dealer to cut the key and program it for your car. This is less expensive than purchasing a new key fob.
It is possible to add another key to your car even if you don't have one, however it requires a great deal of research and work. It costs a few hundred dollars to purchase a second car key. The computer of the vehicle also has to be programmed. This can be accomplished by a professional, however it's a costly choice for most owners.
Replacement Ignition
Contrary to earlier Saab cars, the modern SAAB 9-3 models have an advanced alarm system that is dependent on a coded keys. If you lose your only key, it can be expensive to add another one since the car needs to have a specific computer installed and also be programmed to accept a new key. The majority of locksmiths aren't able to do this and even dealers will charge hundred dollars just to program the new key!
If you've lost your sole working key the dealer will replace your car's computer (known as the CIM or SAAB TWICE) in order to make a replacement, and they will charge you a premium price for it. We can reprogram the current EEPROM of your car's computer to make it prepared for a new key. This will save you more than 50% on what you would have to pay the dealer.
If you've been a long time owner of an 03-11 SAAB 9-3, you likely know that the ignition key isn't the most robust. If your ignition key isn't functioning properly, it is time to consider replacing it. They can become extremely sticky and the buttons are known to fall off. It's not so difficult as it may seem to replace the ignition key. With the right tools, it is able to be accomplished in a short time.